Get in touch.
Say hello
T: + 44 (0)117 953 5252
F: + 44 (0)117 953 5373
E: sales@avon-barrier.com
Find us
147 South Liberty Lane
Bristol, UK
BS3 2TL
Avon EB950CR Armstrong Barrier
EB950CR - Armstrong Barrier
The Avon EB950CR Armstrong Barrier is a high security rising arm barrier that has been PAS 68 impact rated and offers a high level of protection where central roadway foundations are not possible / practical.
The drop arm barrier can withstand direct impact forces in excess of 720 KJ, and provides shallow mounted protection to sites from extreme Vehicle Borne Improvised Explosive Device (VBIED) attack.
The EB950CR offers an optional VADS (Vehicle Access Delay Standards) Locking System that can be retrofitted to the end of the boom. This modification has undergone additional IWA 14-1 testing using an 1500Kg (M1) saloon car travelling at 30mph. It also successfully passed the CPNI VADS (Vehicle Access Denial Standard) testing.
The VADS Locking System ensures a variety of vehicle attack tactics are protected against. It has been designed to retrofit to an existing EB950CR and is available as an option for new EB950CRs.
The EB950CR is a highly dependable security product that will easily interface with a wide range of control equipment. Assembled in our fabrication facilities using heavy gauge materials to give maximum strength and durability. The EB950CR is a traditional rising arm barrier security barrier with the benefits of high level physical protection.
Key features & benefits
Features
- Physically impact rated to PAS 68 criteria & IWA 14-1
- Physically successfully rated to VADS
- Shallow mounting from 470mm overall depth
- Manufactured from heavy gauge materials
- Manual hand pump facility
- Programmable controller
- 100% duty cycling
Benefits
- Confidence in proven performance
- Overcomes site depth restrictions
- Strength and durability
- Operational under power failure conditions
- Flexibility to interface with all forms of access control
- Reliable and dependable
Product overview
Independently physically impact rated in accordance with the BSi PAS 68 by the Transport Research Laboratory (TRL) it achieved a PAS 68 classification V/7500(N2)/48/90:0/0 and remained operational after the impact.
The high security barrier comes with a hold to run control as standard, the hydraulic power pack is controlled by a programmable controller and can be customised to interface with a wide range of access control equipment to suit specific customer requirements. Available configurations include (but are not limited to) inductive loop systems, card readers, communication equipment and manned guard emergency systems.
In the event of power failure a manual pump is provided to ensure operator control is maintained.
The EB950CR PAS 68 security barrier is an Electro-Hydraulically operated rising arm barrier with arm widths of up to 4.5m span. The barriers arm sits 1 m above the roadway and is supported by 2 side support frames. During impact the arm slides into a locked position protecting the main drive mechanism from damage.
Independently physically impact tested
Options available
- VADS Locking System
- Top and Bottom skirts
- Safety protection cages
- Access and intercom systems
- Emergency buttons with lock down
- Accumulator systems for hydraulic operation
- Integral inset warning lights
- UPS backup for the electrical system
- Interlocking systems to give air-lock type protection on sites with higher threat levels
- Inductive loop systems
- Traffic lights and back-indications systems
Technical Specification
| Physical Dimensions: | 600mm W x 890mm D x 1230mm H |
| Barrier catcher foundations: | 1500mm W x 3600mm D x 470mm H |
| Barrier Arm: | 4.5m max cwo |
| Basic Power requirements (dependent on config): | Single phase 220V AC, 50Hz, Min 16 Amps |
| Control Voltage: | S.E.L.V 24V |
| Impact Absorption: | 723KJ (fully operational immediately after impact) |
| PAS68 Security Rating: | PAS 68:2005 V/7500(N2)/48/90:0/0 |
| IWA 14-1 Security Rating: | IWA 14-1:2013 V/1500(M1)/48/90:1.9 |
| CPNI VADS Rating: (option) | Passed |
| PAS 68 Rated Model:
IWA 14-1 Rated Model: |
1m H x 3m W
1m H x 4.5 W |
| Speed of operation: | 6-10 seconds to raise or lower |
| Operating temperature range available (option): | -25°C – +70°C |
| Construction: | The boom catcher frames are fabricated from heavy steel sections, which are anchored into the foundations: they are designed to support the boom in the lowered position and to take a full impact load. The recess in the catchers prevents the boom from lifting when impacted. Outboard extensions inhibit the vehicle running up the catcher frame. The boom is fabricated from heavy steel section clamped to a lift yoke which is designed to slip through its clamp in the event of a collision, to engage under the catcher frame recesses. The lift assembly comprises twin cranks welded to a solid shaft, which rotates in non-metallic bearings. A heavy-duty steel yoke is welded to the outer ends of the shaft. The crank is rotated through 90 degrees by the action of a hydraulic cylinder. Main barrier cabinet is constructed from steel plate; it houses the hydraulic equipment/reservoir, drive mechanism and electrical enclosure. |
Armstrong Security Barrier - Resources
Datasheet – Avon EB950CR Armstrong Barrier
Format: pdf
Datasheet PAS68 Security Barrier – Avon EB950CR Armstrong Barrier is a high security rising arm barrier PAS 68, IWA 14-1 and VADS Locking Mech option
Drawings – Avon EB950CR Armstrong Barrier
Format: pdf
Foundation drawings and layouts for EB950CR Armstrong barrier.
Specification – Avon EB950CR Armstrong Barrier
Format: pdf
Procurement Specification for a PAS 68 High Security Lift Arm Barrier (HSLAB)
Related PAS 68 Products
Avon Cedar Gate PAS 68 Manual Gate The Avon Cedar Gate is a PAS68 impact rated security gate originally designed and developed around the Newey barrier and Avon MDA barrier,…